FIX SPEED BOOSTER SISTEMS
STANDARD SPECIFICATIONSFlow: up to 1 500 m³/h
Head: up to 160 m
Pmax: 16 bar
Start up: soft with inverter
Supply voltage:
- 1×230 V 50 Hz for single-phase sets
- 3×400 V 50 Hz for three-phase sets
Relative humidity: max 50% at 40 °C (without condensation)
Max. altitude at nominal load: 1000 m above sea level
Pumped liquid temperature: clean water between 5°C and +60°C
DETAILS
Pressure booster set with fixed speed and horizontal pumps are built with two or more horizontal pumps assembled on a galvanized frame. This type of equipment includes include all accessories (valves, pressure switches, and manometer) to connect the pumps to the outlet stainless steel manifold. These units can reach 16 bar pressure and 140 m³/h.
The GDX Technologies range of fixed speed booster sets includes models with 2 to 3 electric service pumps, and an additional jockey pump able to adapt to specific requirements within different applications. The start and stop of the pumps is based on the pressure values set on a pressure transducer, in order to deliver the water required. One pressure transducer is connected on the delivery side of the set.
A second one is connected but only as a reserve device. With the cyclic changeover function, duty assignment is rotated to ensure both pumps remain active and with even running hours, so wear is uniform and the use factor is reduced for longer pump life. This system also ensures continuity of operation, in case one of the pumps needs maintenance. Pumps are controlled by an electric control panel with display on the front door. The electronic card and panel can also be used for waste water applications with up to 3 pumps installed.
